性能特点：
复合硅酸镁保温砂浆是由优质海泡石绒、俄罗斯纤维、稀土、硅酸铝纤维及珍珠岩等多种 耐火材料，填加适量高温粘合剂精制而成。（产品分为膏状或干状两种） 干固后成封闭微孔，网状纤维结构保温材。产品分别有硅酸盐（镁）保温砂浆、海泡石、稀土保温砂浆。
Composite magnesium silicate thermal insulation mortar is made from high grade sepiolite, Russia fiber, rare earth, aluminum silicate fiber and perlite and other refractory materials, adding proper adhesive high temperature and refined. (the product is divided into two kinds of paste or dry type) into a closed hole, the structure of the net fiber structure heat preservation material. The products include a silicate (magnesium) insulation mortar, sepiolite, rare earth insulation coating.
本品具有导热系数低、粘接强度大、不脱落、不开裂、容重轻、施工 不受设备限制，耐酸、耐碱油的腐蚀，对人体无毒无害，不腐蚀设备等。
This product has low thermal conductivity, high bonding strength, no shedding, no cracking, light weight, the construction is not restricted by the equipment, oil, acid and alkali corrosion, no harm to human body, no corrosion of equipment.
施工方法：
首先把设备表面清除干净，把产品的3－5袋为一组加水进行搅拌成膏 状（湿料可直接使用）用托板和铁抹子将设备表面抹一遍，厚度不超过 5mm，干透后再进行第二次涂抹，厚度约为20 mm，按此顺序直到要求厚度 为止。表面压光，然后再作防水，如设备有振动，距保温层表面约10mm处 增加一层铁丝网并扎紧，以防时间久后脱落。
Construction method: first the equipment surface clean, the product 3 - 5 bags for a group of water for mixing into a paste (wet material can be directly used for pallet and trowel) equipment will wipe the surface again, thickness of not more than 5mm, dry after the second smear, about 20 mm thickness. In this order until the required thickness. The surface pressure light, and then make a waterproof equipment such as vibration, from the surface of the insulation layer of about 10mm adds a layer of barbed wire and fastened to prevent a long time off.
表层防水作法：本厂配有多 种颜色憎水剂，可供用户选择。 施工可用毛刷或滚刷两遍可达到防水效果。第一遍涂刷与第二遍涂刷时间 间隔5分钟即可，憎水剂内禁止加水或其它化学助剂，其特点耐350高温 度，耐低温-100度不结冰，防腐防水抗碱性稳定。 产品特点 1、 导热系数低，粘结力强，使用厚度薄，为一般保温材料的40～65%节约 工程成本。
Surface waterproof method: the factory is equipped with a variety of color and water repellent, can be used for the user to choose. The construction of usable brush or rolling brush two times can achieve waterproof effect. The first time and second time interval of 5 times, the water or other chemical additives, which is characterized by high temperature resistance, low temperature -100 degrees not frozen, anti - corrosion and anti - alkaline stability. Product features 1, low thermal conductivity, strong adhesion, the use of thin thickness, for the general thermal insulation material of the 40 ~ 65% save engineering costs.
